Printer Friendly

NAC-200 Extruded Carbon & Baked Carbon Rod – Fine Grain


TYPICAL EXTRUDED & BAKED CARBON ROD PROPERTIES

DESCRIPTION
Extruded and baked carbon rod - 1/8” to 6” diameter

SPECIFICATIONS
1 - Rods must be clean (sand free)
2 - No cracks
3 - No chips larger than 1/8” on ends
4 - No chips larger than 1/16” on body
5 - Curvature no more than 0.5% of length, arc-to-chord
6 - Roundness: 4% max. between major and minor diameters
7 -
Minimum diameter: 1/8” to 3/8” nominal +13%
  1/2" to 6" +9% 
8 - Minimum length: Nominal +3/4”

PHYSICAL CHARACTERISTICS
1 - Apparent Density (g/cc) 1.68
2 - Flexural Strength (psi) 4,500
3 - Specific Resistance .0008
4 - Grain Size (inch) .008
5 - Ash (ppm) 6,000
12” LENGTH
3/32” X 12”
1/8” X 12”
5/32” X 12”
3/16” X 12”
1/4" X 12”
5/16” X 12”
3/8” X 12”
1/2" X 12”
5/8” X 12”
3/4" X 12”
7/8” X 12”
1” X 12”
24” LENGTH
1” X 24”
1 1/8” X 24”
1 1/4" X 24”
1 1/2" X 24”
1 3/4" X 24”
2” X 24”
2 1/4" X 24”
2 1/2" X 24”
48” LENGTH
1 1/4" X 48”
1 1/2" X 48”
1 3/4" X 48”
2” X 48”
2 1/4" X 48”
2 1/2" X 48”
2 3/4" X 48”
3” X 48”
3 1/4" X 48”
3 1/2" X 48”
3 3/4" X 48”
4” X 48”
4 1/4" X 48”
4 1/2" X 48”
4 3/4" X 48”
5” X 48”
5 1/4" X 48”
5 1/2" X 48”
5 3/4" X 48”
6" X 48”
 

Home | Company Profile | NAC Advantage | Manufacturing Capabilities | HEATGUARD | Standard Graphite & Carbon Rods & Blocks
Granular Carbon & Graphite | Toll Carbon Extruding, Baking & Graphitization | Quote Request | Contact
Home PageCompany ProfileThe GMI AdvantageRequest For QuoteContact GMI