Printer Friendly

NAC-500 Extruded Graphite Rod – Fine Grain, High Density


TYPICAL EXTRUDED GRAPHITE ROD PROPERTIES

DESCRIPTION
Graphite rod - 1/8” to 6” diameter

SPECIFICATIONS
1 - Diameter tolerance is + or - .005” – length tolerance is plus .500 for 1/8” to 1” diameter X 12” long rods.
a. The 1” to 2 1/2" X 24” rods are to be .010 on diameter and +1.000 on length.
b. The 3” to 6” rods are as extruded
c. Lengths of 48” are available on 1 1/4" diameter and larger.
2 - Curvature standard tolerance: 1/2 of 1% maximum measured arc-to-chord.

PHYSICAL CHARACTERISTICS
1 - Apparent Density (g/cc) 1.72
2 - Flexural Strength (psi) 4,200
3 - Specific Resistance .00040
4 - Grain Size (inch) .008
5 - Ash (ppm) 1000
12” LENGTH
3/32” X 12”
1/8” X 12”
5/32” X 12”
3/16” X 12”
1/4" X 12”
5/16” X 12”
3/8” X 12”
1/2" X 12”
5/8” X 12”
3/4" X 12”
7/8” X 12”
1” X 12”
1” X 17”
24” LENGTH
1/2” X 24”
5/8” X 24”
3/4" X 24”
7/8" X 24”
1" X 24”
1 1/8” X 24”
1 1/4" X 24”
1 1/2" X 24”
1 3/4" X 24”
2” X 24”
2 1/4" X 24”
2 1/2" X 24”
48” LENGTH
1 1/4" X 48”
1 1/2" X 48”
1 3/4" X 48”
2” X 48”
2 1/4" X 48”
2 1/2" X 48”
2 3/4" X 48”
3” X 48”
3 1/4" X 48”
3 1/2" X 48”
3 3/4" X 48”
4” X 48”
4 1/4" X 48”
4 1/2" X 48”
4 3/4" X 48”
5” X 48”
5 1/4" X 48”
5 1/2" X 48”
5 3/4" X 48”
6" X 48”
 

Home | Company Profile | NAC Advantage | Manufacturing Capabilities | HEATGUARD | Standard Graphite & Carbon Rods & Blocks
Granular Carbon & Graphite | Toll Carbon Extruding, Baking & Graphitization | Quote Request | Contact
Home PageCompany ProfileThe GMI AdvantageRequest For QuoteContact GMI