Printer Friendly

NAC-673 Extruded Graphite Rod – Medium Grain, High Density


TYPICAL EXTRUDED GRAPHITE ROD PROPERTIES

DESCRIPTION
Graphite rod - 2” to 6” diameter

SPECIFICATIONS
1 - Diameter tolerance is + or - .005” – length tolerance is plus .500 for 1/8” to 1” diameter X 12” long rods.
a. The 2” to 6” rods are as extruded.
b. Lengths of 48” are available on 1 1/4" diameter and larger.
2 - Curvature standard tolerance: 1/2 of 1% maximum measured arc-to-chord.

PHYSICAL CHARACTERISTICS
1 - Apparent Density (g/cc) 1.70
2 - Flexural Strength (psi) 2,450
3 - Specific Resistance (ohm-m) 9.0
4 - Grain Size (inch) .030
5 - Ash (ppm) 0.1%
12” LENGTH
2” X 12”
2 1/4” X 12”
2 1/2” X 12”
2 3/4” X 12”
3" X 12”
3 1/4” X 12”
3 1/2” X 12”
3 3/4" X 12”
4” X 12”
4 1/4" X 12”
4 1/2” X 12”
4 3/4" X 12”
5” X 12”
24” LENGTH
2” X 24”
2 1/4” X 24”
2 1/2" X 24”
2 3/4" X 24”
3" X 24”
3 1/4” X 24”
3 1/2" X 24”
3 3/4" X 24”
4" X 24”
4 1/4” X 24”
4 1/2" X 24”
4 3/4" X 24”
5" X 24”
48” LENGTH
2” X 48”
2 1/4" X 48”
2 1/2" X 48”
2 3/4" X 48”
3” X 48”
3 1/4" X 48”
3 1/2" X 48”
3 3/4" X 48”
4” X 48”
4 1/4" X 48”
4 1/2" X 48”
4 3/4" X 48”
5” X 48”
5 1/4" X 48”
5 1/2" X 48”
5 3/4" X 48”
6" X 48”
 

Home | Company Profile | NAC Advantage | Manufacturing Capabilities | HEATGUARD | Standard Graphite & Carbon Rods & Blocks
Granular Carbon & Graphite | Toll Carbon Extruding, Baking & Graphitization | Quote Request | Contact
Home PageCompany ProfileThe GMI AdvantageRequest For QuoteContact GMI